Future products. Some products available now. Call 937-859-7881 for availability.  

NEW!! Slave Cylinder repair kit. It can also be used as an adapter kit for 93-95 Camaro and others. Eliminates the need to buy the expensive slave cylinder unit and plastic hydraulic line. Allows the use of AN fittings or compression fittings to connect a stainless steel braided line between your MGB master cylinder and the Camaro slave cylinder.

  SPEEDOMETER CABLE SET-- For use with vehicles equipped with Ford T5 or GM T5 transmissions that require a VSS generator. Complete 2 piece cable set with built in VSS generator. Fits all MG and MGB factory stock speedometers and many other American and British vehicles. Compatible with GM OBD 1, OBD 2 and other GM ECM's. Also works with Ford ECM's. Call for more information. (Click)

SPEEDOMETER CABLE-- One piece cable for MG and other British vehicles equipped with Ford T5 or GM T5 transmissions that do not require a VSS generator. Fits all MG and MGB with factory stock speedometers and many other American and British vehicles. Call for more information 

RELAY CONTROL BOX - Brand name (--------------). This device can control 1 to 4 separate circuits or all at the same time. It can be used  on a positive or negative ground vehicle. All circuits or individual circuits can be controlled by a negative or positive input control voltage signal. This feature is especially helpful when using the GM OBD 1 or OBD 2 negative digital signal for controlling the cooling fans. It's main use is to control fuel pumps, fans, ignition, electric water pumps, lights, horns, etc. Each circuit is protected with it's own  blade type fuse. It has green LED's to monitor each input and output circuit. It has red LED's to monitor internal positive and ground circuits for a total of 14 LED's. This unit can be mounted any way imaginable. It can also be used with a sequential timer for displays or other electronic control functions. It will be available pre-assembled or in kit form for those who want to save money.

Billet Mechanical water Pump. Really cool version of a water pump that is a three piece unit. Pulley is hidden behind pump. Very expensive at this point but is available for those who want something that works very well and has one of a kind appearance. Call for pricing. (Click)

AN fittings for fuel rail. Two stainless steel fittings for the fuel injector rail.  Allows the use after market fuel regulators and flexible AN fuel feed and return lines. Compatible with all popular AN hose fittings such as Earl's, Aeroquip, JEG's, etc. Available 6/17/07

Throttle body, 65 mm  for 3.4 engine. Requires some light welding and grinding of the air intake opening in the upper plenum. Available 6/17/07.

Straight Thermostat housing, outlet.  Fits FWD engines only. Points straight forward. Allows the use of various accessories and simplifies water neck to radiator hose connection. Available now.

Adapter for using the stock MGB drive shaft for lower performance V6 applications. See Driveline page

Power steering for all V6 MGB's. Power steering available for FWD engine conversion. 6/17/07.

Air conditioning for rubber bumper V6 MGB's.

Throttle body plate--fits behind throttle body and allows it to be angled -5 degrees. This will simplify installing an air  filter and intake system.

Air intake & filter Zip kit--used with throttle body plate. Allows free flow of cool air to intake manifold. Worth 8 to10 HP. For 1976 to 1980 MGB only.

Surge tank (swirl pot, accumulator)--fits into the unused battery space. Has hi-pressure pump, accumulator and all AN fittings for feed and return lines. For those who take cornering seriously. 

Flywheel, clutch & bell housing bolt kit--this kit provides all the necessary hardware to install the drive components. Available 6/17/07.

 

Clutch fork pivot ball lube kit--this kit contains a modified pivot ball, zerk fitting and tools. Use this kit to modify your bell housing so the clutch pivot ball can be lubricated to eliminate any  wear and noise. This can also be an optional service when you order your bell housing. Available 6/17/07.

Billet Gearshift Lever--This lever is made to fit the T5 transmission. It is very much like the original MGB shifter in appearance and height. It will accommodate the MGB shifter knob or any aftermarket knob. Available 6/17/07.

Shifter cover plate--aluminum plate that fits over the opening for the GM or Ford T5 shifter. Works also as a template to allow the installer to modify the area where the shifter will be located. Uses original hardware.

Oil filler cap-- Billet aluminum. For aluminum head engines only. Available 6/17/07.

Billet! Shifter cover plate--same as above but made from 3/8ths 6061 aluminum. Has 5 forward gear numbers and reverse locations machined in. Great for those who don't want a console. Uses chrome flat head screws that are flush with plate surface. Bright polish optional. Fits all models from 1968 to 1980.

Billet! Shifter cover plate for a 4 cylinder MGB. Same as above but has 4 forward gear numbers and reverse locations machined in. Bright polish optional. Specify year when ordering.

Billet! Shifter cover plate, fits over console.  Has 5 forward gears numbers and reverse locations machined in.

Billet! Shifter cover plate, fits over console. Same as above. Has 4 forward gear numbers and reverse locations machined in.

NEW!!  TCE Motorsports has announced that they have an upgrade for the 3500 engine throttle body. This item is 68 mm and will be available soon. 

NEW!!  VSS adapters for all Killer B Conversions are now available. Call for you application

Have an idea? Share it with us. Your idea will be handled  in strict confidence and assurance. Rewards will be issued by cash or part discounts on selected items.

Items listed with *Wade are brand name products of British Car Conversions.