O2 Sensor - Correct O2 sensor made by Bosch. $29.95

 Bung for O2 Sensor -  (optional). Welds into exhaust manifold to accept O2 sensor. $11.95

 Engine Header Flange Plates - (optional).  For FWD, aluminum heads. This pair of quality 3/8"flanges are precision made to fit perfectly over the engine exhaust ports for maximum flow. Just weld in your pipe bends and build yourself a nice set of headers. $75.00 *Wade

 Engine header Flange Plates - For RWD iron heads. This pair of quality machined 3/8"flanges are precision made to fit  the engine exhaust ports for maximum flow. Just weld in your pipe bends and build yourself a nice set of headers. $89.00 *Wade 

NEW!! Uni-Fit Engine header Flange Plates - Uni-Fit  flanges come in a 6 perfect matching piece kit or individual pieces. These are shaped like the large FWD tunnel type port but can also encompass the port on the  RWD head perfectly. They are counter bored so the primaries can be inset into the flange and be welded or brazed encircling the flange around the outside, not the face. See photo (Click) This makes for a flat smooth mating surface with no warping. The primary tubes port match the flange perfectly. An iron head, aluminum head or flat mating surface is required to hold them in place while welding. Full instructions for the RWD or FWD use come with each set. See the flanges installed on our header at (Click)  $15.95 each or $89.00 per set.

 Standard Hugger Exhaust Manifolds - FWD Engines -For 2.8 to 3.5 aluminum head engines. These manifolds have machined 3/8 thick flanges for tight sealing and strength. They have oversized ports and 1 1/2 primary tubes with 2" outlets for very good flow. Not fine tuned but will deliver more HP then the stock factory ones or anything else available. Great for low, middle and upper end power range .  $349.95 *Wade

 Standard Hugger Exhaust Manifolds - RWD Engines - For 2.8 to 3.4 Camaro, Firebird, S10 and all other iron head, RWD engines. These manifolds have machined 3/8 thick flanges for tight sealing and strength. They have oversized ports and 1 1/2  primary tubes with 2" outlets for very good flow. Not fine tuned but will deliver more HP then the stock factory ones or anything else available. Great for low, middle and upper end power range.  $349.95  (Click)*Wade

 Tuned Headers -  (optional).  Professionally engineered, dyno tuned. Great power output from 1500 to 6500 RPM. An absolute must for those who seek maximum output from their converted FWD engine or RWD Camaro, Firebird, S10 RWD engines. Custom built upon request only.   (Click)   

 Super Tuned Headers- (optional).  The ultimate top of the line tuned header for the  power seeking tuning ace. Very expensive but work superbly and look fantastic. Call for pricing. (Click)

  *Wade Items listed with *Wade are brand name products of British Car Conversions.

Call British Car Conversions at 937 859 7881 from 9 to 5 Eastern Time. 

Email to: Killerbv6@aol.com